Complete the Axle Plate Fixture with 3/4" threaded rods and spacers. The fixture that holds the axle plates has three hole sizes, 1", 3/4", and 5/8". The 3/4" threaded rods and spacers are used with axle plates that have 3/4" or 20mm slots. The spacers need to be cut to length based on the distance between your axle plates
- Two 3/4" threaded rods 14" in length.
- Two 8" spacers (used to make four spacers to space axle plates away from the fixture plates).
- One 2" spacer used between the fixture plates on the outer threaded rod (see pictures).