Complete the Axle Plate Fixture with 1" threaded rods and spacers. The fixture that holds the axle plates has three hole sizes, 1", 3/4", and 5/8". The 1" threaded rods and spacers are used with axle plates that have 1" or 25mm slots. The spacers need to be cut to length based on the distance between your axle plates
- Two 1" threaded rods 14" in length.
- Two 8" spacers (used to make four spacers to space axle plates away from the fixture plates).
- One 2" spacer used between the fixture plates on the outer threaded rod (see pictures).